PA-Wt10
Extra white film coat for plain Amoxycillin
Solvent base extra white film for plain Amoxycillin and dissolution critical tablets.
Product details
- Product code
- PA-Wt10
- Brand
- Rglax Coat
- Coating system
- Moisture Barrier Coating
- Process base
- Non-aqueous (solvent)
- Finish
- Extra white
- Physical form
- Ready-mix powder, dispersed on site
- Usage
- Pharmaceutical, nutraceutical, ayurvedic and herbal solid dosage
- Made at
- Plot No. 30, Industrial Area Tahliwal, Himachal Pradesh, India
PA-Wt10 price and quantity
- Indicative price
- ₹1,400 per kg
- Trial quantity
- Sent before any commercial order
- Shade matching
- Against a retained sample you send us
- Supplied as
- Ready-mix powder, dispersed on site
- Quoted against
- Shade, pack size and annual volume
PA-Wt10 product specifications
- Coating system
- Moisture Barrier Coating
- Process base
- Non-aqueous (solvent)
- Finish
- Extra white
- Supply form
- Ready-mix
- Actives named
- Amoxycillin
- Shade matching
- Against your retained sample
PA-Wt10 trade information
- Despatched from
- Plot No. 30, Industrial Area Tahliwal, Himachal Pradesh, India
- Supplied to
- India and export markets
- Licence
- NNZ/23/238
- Compliance
- WHO-GMP Compliance Unit
Price and minimum order
We do not publish a rate for PA-Wt10 because it moves with the shade, the pack size and the annual volume, and a number that ignores those three is a number you would have to renegotiate. Send the tablet, the target and the quantity and you get a firm quote the same working day.
A trial quantity goes out before any commercial order, with the process parameters this grade was developed on, so you can run it on your own pan before anyone commits to anything.
What to send us
- The active and the strength
- A retained tablet, if you are matching a shade
- Coater size and batch charge
- Target release profile or stability zone
- Approximate annual quantity
Product description
Solvent base extra white film coat for plain Amoxycillin tablets and other products where dissolution has to be protected while the core is covered to a high opacity.
Runs on the non-aqueous band. Dissolution rather than appearance is the constraint on these cores, so check dissolution at the end of the run and not only cover and gloss.
Recommended process
The parameters this grade was developed on, so your first trial starts from a known point.
Rglax Coat film coating
Tablet bed and inlet temperatures are given as aqueous over non-aqueous (AQ / NAQ). Settings are indicative and confirmed against your core during trials.
| Coating equipment | Conventional coaterAQ / NAQ12 inch pan | Auto coaterAQ / NAQ24 inch pan | Conventional coaterAQ / NAQ36 inch pan | Auto coaterAQ / NAQ48 inch pan |
|---|---|---|---|---|
| Pan speed (rpm) | 18 to 20 | 14 to 16 | 8 to 12 | 3 to 5 |
| Tablet charge (kg) | 0.5 to 1 | 3 to 5 | 40 to 50 | 100 to 130 |
| Tablet bed temp (°C) | 35-40 / 30-35 | 35-40 / 30-35 | 35-40 / 30-35 | 35-40 / 30-35 |
| Inlet temp (°C) | 75-80 / 60-65 | 75-80 / 60-65 | 75-80 / 60-65 | 75-80 / 60-65 |
FAQs about PA-Wt10
Tell us your requirement
Name the tablet, the target and the volume. We quote against PA-Wt10 or against whichever grade actually fits, and we will say so if it is a different one.
Enquiring about
PA-Wt10
Extra white film coat for plain Amoxycillin
Other moisture barrier grades
Grades a buyer comparing PA-Wt10 usually looks at next.
CVS-101
Moisture barrier for Amoxycillin and Clavulanate
- System
- Moisture barrier
- Base
- Non-aqueous (solvent)
- Finish
- Extra white, moisture barrier
MB 31RP
Moisture barrier for multivitamin and ferrous tablets
- System
- Moisture barrier
- Base
- Non-aqueous (solvent)
- Finish
- Colour or white, moisture barrier
AC-8
Moisture barrier for special category tablets
- System
- Moisture barrier
- Base
- Non-aqueous (solvent)
- Finish
- Moisture barrier