Enteric Coating System

Ready-mix enteric coating material on four polymer bases, each grade formulated for a named active rather than sold as a single universal film.

Request a trial quantity All Rglax Coat grades

What this range covers

Rglax Coat enteric coating products help you deliver a final tablet that saves development, scale-up and production time, while assuring the integrity of the coating for the safety and efficacy of your finished dosage form. Systems are available on a variety of delayed release polymers for aqueous or organic processing.

Actives covered by grades in this range

Pantoprazole group
Diclofenac
Serratiopeptidase
Duloxetine
Mesalamine

Range

Grades held: 5
Process base: Non-aqueous (solvent), Aqueous
Brand: Rglax Coat
Made at: Tahliwal, Distt. Una, H.P.

An enteric system is two layers, not one. The seal isolates an acid labile core, the enteric film holds through the stomach and releases as pH rises.

Grades in this range

5 grades, each with its own data sheet.

Application parameters

Starting parameters by pan size.

Rglax Coat enteric coating

Bed temperature is held low through the functional layer, which protects the polymer film. Settings are indicative and confirmed against your core during trials.

Coating equipment	Conventional coater12 inch pan	Auto coater24 inch pan	Conventional coater36 inch pan	Auto coater48 inch pan
Pan speed (rpm)	18 to 20	10 to 14	8 to 12	3 to 5
Tablet charge (kg)	0.5 to 1	3 to 5	40 to 50	100 to 130
Tablet bed temp (°C)	30 to 32	30 to 32	30 to 32	30 to 32
Inlet temp (°C)	45 to 50	45 to 50	45 to 50	45 to 50

Quantity for your batchMaterial to issue at your charge and target weight gain, including process loss.Build-up in mg per cm²Percentage weight gain hides film thickness. This is the number that scales.

Before you specify a grade

Other coating systems