Hygroscopic Adsorbent
An adsorbent for hygroscopic actives such as Sodium Valproate and L-Carnitine that stick, pick and cap on the press.
What this range covers
HR100 is a hygroscopic adsorbent material for hygroscopic drugs. It works effectively on Sodium Valproate, L-Carnitine, Valproate Sodium and other actives that create problems during compression and afterwards.
Actives covered by grades in this range
- Sodium Valproate
- L-Carnitine
- Valproate Sodium
Range
- Grades held
- 1
- Process base
- Dry blend
- Brand
- Rglax Coat
- Made at
- Tahliwal, Distt. Una, H.P.
Grades in this range
1 grade, each with its own data sheet.
Common questions
Sodium Valproate, L-Carnitine, Valproate Sodium and other hygroscopic drugs that pick up moisture and create problems during compression and afterwards.
No. It is added at the blending stage ahead of compression. Where a hygroscopic active shows as sticking, picking or capping on the press, it is worth trying before reworking the granulation, because it addresses the moisture rather than the binder system.
Sticking, picking and capping are the usual signs, and they get worse as the shift goes on and ambient humidity rises. If the granulation was sound and the trouble started with the active, the moisture is the thing to address first.
Before you specify a grade